HARLEY DAVIDSON DYNA BLACK EXHAUST SHIELDS INSTALLATION INSTRUCTIONS

download
1. Allow the motorcycle to cool. 2. Note the position of the OE clamp screws securing the exhaust shields to the exhaust pipes. NOTE The clamp screws are positioned on either side of the exhaust pipe for clearance. 3. See Figure 1. Open the band clamps (1) and spread the bands to remove the exhaust shields (2) from the exhaust. 4. Remove the clamps from the exhaust shields and save for installation. Install Black Exhaust Shields 1. Install the OE clamps to the new exhaust shields. 2. See Figure 2. Spread the band around the exhaust pipes and push the end of the bands to engage the clamp screws. Tighten the screws to hold the exhaust shields in place. 3. Adjust the shields and band clamps to access clamp screws and to avoid contact with other components. 4. Tighten the clamp screws